Curling Iron / Flat Iron in Glendale — $2/yr to Run (34.2¢/kWh)
Your curling iron / flat iron in Glendale costs about $0/month at 34.2¢/kWh. See daily, monthly, and yearly costs, plus tips to cut your bill.
Glendale, CA Electricity Rate
34.2¢/kWh
Utility: Pacific Gas & Electric
+163% vs national avg
National avg: 13.0¢/kWh
Daily Cost
$0.01
0.0 kWh/day
Monthly Cost
$0.17
1 kWh/mo
Annual Cost
$2
6 kWh/yr
Lifetime (5yr)
$10
energy only
Monthly Cost Breakdown in Glendale
| Period | kWh | Glendale Cost | National Avg | Difference |
|---|---|---|---|---|
| Daily | 0.0 | $0.01 | $0.00 | +$0.01 |
| Weekly | 0.2 | $0.06 | $0.02 | +$0.04 |
| Monthly | 0.5 | $0.17 | $0.07 | +$0.11 |
| Quarterly | 1.5 | $0.51 | $0.20 | +$0.32 |
| Annual | 6.0 | $2.05 | $0.78 | +$1.27 |
Customize Your Curling Iron / Flat Iron Cost
Adjust usage hours and electricity rate to calculate your exact cost in Glendale.
Daily
$0.01
Monthly
$0.17
Annual
$2
5-Year
$10
Energy Saving Tips for Curling Iron / Flat Iron in Glendale
- ✓Glendale electricity rates are 163% above the national average — energy efficiency matters more here.
- ✓A smart Curling Iron / Flat Iron with scheduling optimization can save ~$0/year at Glendale rates.
- ✓Use auto-shutoff models
- ✓Unplug after each use
- ✓Lower temperature for fine hair
Highest-Cost Appliances in Glendale, CA
See which appliances cost the most to run at Glendale's 34.2¢/kWh electricity rate.
Level 2 EV Charger (240V)
Transportation · 7,200W
$4,427/yr
$368.93/mo
Electric Furnace
HVAC · 10,000W
$3,074/yr
$256.20/mo
Electric Tankless Water Heater
Water Heating · 18,000W
$2,244/yr
$187.03/mo
EV Charger (Level 2)
Garage · 7,200W
$2,214/yr
$184.46/mo
Boiler (Electric)
HVAC · 6,000W
$1,845/yr
$153.72/mo
Electric Water Heater (Tank)
Water Heating · 4,500W
$1,683/yr
$140.27/mo
Water Heater (Tank Electric)
Water Heating · 4,500W
$1,683/yr
$140.27/mo
Heat Pump
HVAC · 2,400W
$1,312/yr
$109.31/mo
Curling Iron / Flat Iron Cost in Other California Cities
| City | Rate | Annual Cost | vs Glendale |
|---|---|---|---|
| Glendale (current) | 34.2¢ | $2 | — |
| Los Angeles | 30.5¢ | $2 | $-0 |
| San Diego | 28.8¢ | $2 | $-0 |
| San Jose | 34.7¢ | $2 | +$0 |
| San Francisco | 26.5¢ | $2 | $-0 |
| Fresno | 29.9¢ | $2 | $-0 |
| Sacramento | 24.7¢ | $1 | $-1 |
| Long Beach | 33.5¢ | $2 | $-0 |
| Oakland | 27.9¢ | $2 | $-0 |
Curling Iron / Flat Iron Energy Cost FAQ — Glendale, CA
Understanding Curling Iron / Flat Iron Energy Costs in Glendale, CA
Glendale is a mid-sized California city where residential electricity rates from Pacific Gas & Electric are shaped by regional energy supply and local demand patterns. Running a low-draw appliance like the Curling Iron / Flat Iron (120W) at Glendale's rate of 34.2¢/kWh costs approximately $2 per year — $1 more than the national average of $1.
Electricity in Glendale is significantly more expensive than the national average — 163% higher. For a Curling Iron / Flat Iron used 0.2 hours per day, this rate premium adds up to $1 in extra annual costs. Energy-efficient models and usage habits have an outsized impact in high-rate markets like this.
Glendale has a high cost of living (index: 143), which means electricity is just one of many above-average expenses. Reducing appliance energy costs — even by small amounts — contributes to meaningful household savings in this market. While no ENERGY STAR version is available, a smart Curling Iron / Flat Iron with automated scheduling can reduce consumption by 15%, saving $0/year.
In Glendale's warm climate (avg 73.3°F), HVAC-related appliances tend to run more frequently, compounding energy costs. A Curling Iron / Flat Iron produces approximately 0.004 tons of CO2 annually at typical usage. Glendale residents can reduce this footprint by optimizing usage patterns, or investing in solar — see our solar savings calculator for Glendale.
Compare All Energy Costs in Glendale
See energy costs for 178+ household appliances at Glendale's local electricity rate.
Frequently Asked Questions
How much does it cost to run a Curling Iron / Flat Iron in Glendale, CA?
At Glendale's average electricity rate of 34.2¢/kWh, a Curling Iron / Flat Iron costs approximately $2 per year to run. That's about $0.17 per month with typical usage of 0.2 hours per day.
What is the electricity rate in Glendale, CA?
The average residential electricity rate in Glendale, CA is 34.2¢/kWh, which is 163% above the national average of 13.0¢/kWh. The primary utility provider is Pacific Gas & Electric.
How much electricity does a Curling Iron / Flat Iron use per year?
A Curling Iron / Flat Iron uses approximately 120 watts and consumes about 6 kWh per year with typical usage of 0.2 hours/day for 250 days/year.
Is a Curling Iron / Flat Iron expensive to run in Glendale?
Compared to the national average cost of $1/year, running a Curling Iron / Flat Iron in Glendale costs $1 more per year due to higher local electricity rates.
How can I reduce my Curling Iron / Flat Iron energy cost in Glendale?
To reduce Curling Iron / Flat Iron costs in Glendale: Use auto-shutoff models. Unplug after each use. Consider using a smart plug to monitor and optimize usage. Also check with Pacific Gas & Electric for local energy efficiency rebates and programs.