Curling Iron / Flat Iron in Frisco — $1/yr to Run (14.1¢/kWh)
Your curling iron / flat iron in Frisco costs about $0/month at 14.1¢/kWh. See daily, monthly, and yearly costs, plus tips to cut your bill.
Frisco, TX Electricity Rate
14.1¢/kWh
Utility: Oncor Electric Delivery
+8% vs national avg
National avg: 13.0¢/kWh
Daily Cost
$0.00
0.0 kWh/day
Monthly Cost
$0.07
1 kWh/mo
Annual Cost
$1
6 kWh/yr
Lifetime (5yr)
$4
energy only
Monthly Cost Breakdown in Frisco
| Period | kWh | Frisco Cost | National Avg | Difference |
|---|---|---|---|---|
| Daily | 0.0 | $0.00 | $0.00 | +$0.00 |
| Weekly | 0.2 | $0.02 | $0.02 | +$0.00 |
| Monthly | 0.5 | $0.07 | $0.07 | +$0.01 |
| Quarterly | 1.5 | $0.21 | $0.20 | +$0.02 |
| Annual | 6.0 | $0.84 | $0.78 | +$0.06 |
Customize Your Curling Iron / Flat Iron Cost
Adjust usage hours and electricity rate to calculate your exact cost in Frisco.
Daily
$0.00
Monthly
$0.07
Annual
$1
5-Year
$4
Energy Saving Tips for Curling Iron / Flat Iron in Frisco
- ✓Frisco electricity rates are 8% above the national average — energy efficiency matters more here.
- ✓A smart Curling Iron / Flat Iron with scheduling optimization can save ~$0/year at Frisco rates.
- ✓Use auto-shutoff models
- ✓Unplug after each use
- ✓Lower temperature for fine hair
Highest-Cost Appliances in Frisco, TX
See which appliances cost the most to run at Frisco's 14.1¢/kWh electricity rate.
Level 2 EV Charger (240V)
Transportation · 7,200W
$1,821/yr
$151.74/mo
Electric Furnace
HVAC · 10,000W
$1,265/yr
$105.38/mo
Electric Tankless Water Heater
Water Heating · 18,000W
$923/yr
$76.92/mo
EV Charger (Level 2)
Garage · 7,200W
$910/yr
$75.87/mo
Boiler (Electric)
HVAC · 6,000W
$759/yr
$63.23/mo
Electric Water Heater (Tank)
Water Heating · 4,500W
$692/yr
$57.69/mo
Water Heater (Tank Electric)
Water Heating · 4,500W
$692/yr
$57.69/mo
Heat Pump
HVAC · 2,400W
$540/yr
$44.96/mo
Curling Iron / Flat Iron Cost in Other Texas Cities
| City | Rate | Annual Cost | vs Frisco |
|---|---|---|---|
| Frisco (current) | 14.1¢ | $1 | — |
| Houston | 12.6¢ | $1 | $-0 |
| San Antonio | 13.5¢ | $1 | $-0 |
| Dallas | 14.0¢ | $1 | $-0 |
| Austin | 14.3¢ | $1 | +$0 |
| Fort Worth | 14.3¢ | $1 | +$0 |
| El Paso | 14.2¢ | $1 | +$0 |
| Arlington | 12.4¢ | $1 | $-0 |
| Corpus Christi | 15.0¢ | $1 | +$0 |
Curling Iron / Flat Iron Energy Cost FAQ — Frisco, TX
Understanding Curling Iron / Flat Iron Energy Costs in Frisco, TX
Frisco is a mid-sized Texas city where residential electricity rates from Oncor Electric Delivery are shaped by regional energy supply and local demand patterns. Running a low-draw appliance like the Curling Iron / Flat Iron (120W) at Frisco's rate of 14.1¢/kWh costs approximately $1 per year — $0 more than the national average of $1.
Frisco rates are 8% above the national average — a modest premium that adds $0 per year to Curling Iron / Flat Iron operating costs. Over the appliance's 5-year lifespan, that's $0 in cumulative extra spending versus the national average.
Frisco's cost of living index of 86 is below the national average, and electricity costs reflect that affordability. The Curling Iron / Flat Iron adds $0.07/month to a typical bill of $154. While no ENERGY STAR version is available, a smart Curling Iron / Flat Iron with automated scheduling can reduce consumption by 15%, saving $0/year.
Frisco's moderate climate (avg 66.3°F) helps keep seasonal energy cost swings manageable for most appliances. A Curling Iron / Flat Iron produces approximately 0.004 tons of CO2 annually at typical usage. Frisco residents can reduce this footprint by optimizing usage patterns, or investing in solar — see our solar savings calculator for Frisco.
Compare All Energy Costs in Frisco
See energy costs for 178+ household appliances at Frisco's local electricity rate.
Frequently Asked Questions
How much does it cost to run a Curling Iron / Flat Iron in Frisco, TX?
At Frisco's average electricity rate of 14.1¢/kWh, a Curling Iron / Flat Iron costs approximately $1 per year to run. That's about $0.07 per month with typical usage of 0.2 hours per day.
What is the electricity rate in Frisco, TX?
The average residential electricity rate in Frisco, TX is 14.1¢/kWh, which is 8% above the national average of 13.0¢/kWh. The primary utility provider is Oncor Electric Delivery.
How much electricity does a Curling Iron / Flat Iron use per year?
A Curling Iron / Flat Iron uses approximately 120 watts and consumes about 6 kWh per year with typical usage of 0.2 hours/day for 250 days/year.
Is a Curling Iron / Flat Iron expensive to run in Frisco?
Compared to the national average cost of $1/year, running a Curling Iron / Flat Iron in Frisco costs $0 more per year due to higher local electricity rates.
How can I reduce my Curling Iron / Flat Iron energy cost in Frisco?
To reduce Curling Iron / Flat Iron costs in Frisco: Use auto-shutoff models. Unplug after each use. Consider using a smart plug to monitor and optimize usage. Also check with Oncor Electric Delivery for local energy efficiency rebates and programs.